Home BBQ Tips and Tricks Holding a grill temperature

Holding a grill temperature

666
0

Holding a grill temperature

The dome gauge on my first kettle read 325°F while dinner cooked at something else entirely. I trust a probe clipped at grate level, next to the meat, in the air. The tool is the thermometer page. This page is what I do when that number is wrong.

Charcoal

Air is the knob. Bottom vent open feeds the fire. Top vent open lets it out, and on a kettle I set the top vent over the meat so the heat washes across it. Both vents half shut will settle a too-hot fire. Shutting the top vent all the way chokes it and makes bitter smoke. I did that trying to “save” a hot pit and the pork tasted like a wet log.

A fire that is too small will not hold 250°F in a wind, and no vent trick fixes a handful of coals. Light enough charcoal for the length of the cook. On a long day that means I add lit coals, not raw ones dumped on a dying bed. Raw coals smolder. The difference between a clean fire and a dirty one is also the wood, how I burn it. Lump and briquettes hold heat differently, which is lump or briquettes.

Gas, offsets, and gadgets

On gas I light the burners I need, lid down for fifteen minutes, then I turn down. The knob is not a number. The grate probe is the number. On an offset, a small clean fire in the firebox beats a packed box. If the cook chamber is 300°F, I have too much fuel, not a mystery.

A fan controller can hold a number while I sleep. I have used one on an overnight shoulder. It does not fix a leaking door or bad charcoal. I am not going to rank five of them by model year. If you want the method those gadgets are trying to automate, it is low and slow. If the day is windy and dry and the county has said no, the temperature you want is zero. Leave it cold.